1) When installing battery components, handle them gently to prevent short circuiting or throwing them.
2) The power cord and junction box, as well as the threading points of the lamp post and components, should be sealed with silicone. The connection wires of the battery components should be firmly fixed at the bracket to prevent the power cord from loosening or falling off due to prolonged sagging or pulling.
3) When installing the lamp head and light source, handle them gently to ensure that the translucent cover is clean and free of scratches, and to prevent rolling and throwing.
4) When moving the battery, do not touch the battery terminals and control valves to prevent short circuiting, rolling, or throwing of the battery.
5) When wiring, pay attention to the positive and negative poles to prevent reverse connection. The wiring terminals should be securely crimped without looseness. The connection sequence should be carefully monitored to prevent short circuits in the circuit.
6) Do not touch the "+" and "-" poles of solar cell modules and batteries together to prevent electric shock hazards.
7) The inverter outputs high voltage power, and touching it can be life-threatening!
8) During the installation process, avoid scratching the lamp body.
9) The bolt connections of the lamp head, lamp arm, upper lamp post assembly, solar cell assembly, etc. are firmly connected without looseness.
10) When installing solar cell modules, it is necessary to add protective plates.
11) Seal the galvanized hole of the lamp post with silicone, pay attention to its beauty.
